Leather Care Part 2: A 4-Step Process

Proper leather care starts with consistency. Leather requires regular care to maintain its "health" and proper performance. Follow this step-by-step guide to help extend the working life of all your valued leather products!

This is also the perfect opportunity to carefully inspect your equipment for any damage or problems than need to be addressed.

Step 1: Use a damp tack sponge and your preferred saddle soap or leather cleaner. Work up a foam lather that will surround the dirt on your equipment and loosen it from the surface. It is important that you clean every leather surface.

Step 2: Remove the dirt and soap using a clean, damp sponge. Be sure that all soap is removed.

Step 3: Allow the leather to air dry for a few minutes. If necessary, use a towel to remove excess water.

Step 4: If the leather is a bit dry, apply a small amount of conditioner with a clean, dry sponge.

Optional "Finishing" Step: If you're looking for a rich, sheen finish, use a clean sponge to apply a small amount of glycerine saddle soap in small circular motions.


Up Next... Leather Care Part 3 - Leather Care Products: What, When & Why?

Subscribe to this blog using the "Follow Our Feed" links to the left or Follow Us on Twitter for immediate updates!

Leather Care Part 1: Initial Oiling or Pre-Conditioning

It is recommended that most leather equipment get an initial, light oiling prior to use. This is most important on the flesh side as it provides a first "conditioning" and aids in the "break-in" process. Some stirrup leathers, such as Oakbark leathers, do not require oil as they are made with ample lubrication. Suede products should never be oiled. Also, please note that some manufacturers have specific care and/or product recommendations for oiling (or not oiling) and/or pre-conditioning. Therefore, please consult with the manufacturer prior to beginning any product care regimen.

In many cases, people will use oil to darken leather products. Please note that some products contain a darkening agent to aid in this process whereas others may not. For example, if you are looking to darken leather, you may use Neatsfoot Oil Compound instead of Pure Neatsfoot Oil.

Avoid Over Oiling! It is important to understand that over-oiling is both easy to do and impossible to undo. When a product is over-oiled, the leather becomes saturated and, in some cases, it can cause excessive stretching on items like stirrup leathers, reins, billets, girths, martingales, etc... Over-oiling can also cause the glues used in areas like saddle knee pads to delaminate, resulting in premature wear and tear. Never soak leather in oil for any length of time.

Oil should be applied at room temperature or slightly warmed, but it should always be comfortable to the touch. Using a piece of sheepskin or soft paint brush, apply the oil sparingly to avoid over-oiling. Resist the temptation to add oil to areas that don't seem quite as dark as another area. Allow the oil to dry at least overnight. If the leather is not completely uniform in color, don't worry! Normal cleaning and conditioning plus use will help to even out the leather color, but it's important that you do not over oil in an effort to rush this process. Keep in mind that some excess oil may be present on the leather when the product is used the first few times. So, we recommend you don't wear your finest show clothes immediately after oiling your saddle!
If you have any questions regarding the initial oiling process, please post your comments at the end of today's article so others may benefit as well!

Up Next... Leather Care Part 2 - Cleaning Leather: A 4-Step Process

Subscribe to the Beval blog using the "Follow Our Feed" links to the left or Follow Us on Twitter for immediate updates!

Leather Care, Part 3 - Products: What, When & Why?

As stated in a recent answer about leather care, consistent care is your best defense against problems that may arise in leather condition from excessive moisture, over-drying, general use, etc... There are a variety of leather care products on the market today to satisfy every need from initial care to daily cleaning and conditioning to restoring old, worn leather. Although we may occasionally refer to a product brand, our intention for this post is not to list specific leather care products, but to give you general insight about the types of products you would use to properly care for you saddles and leather strap goods.

Oil – When and Why? Generally, I recommend only lightly oiling tack when it is new. This will aid in the break-in process as well as darkening the leather in many cases. If the leather is very dry from storage or non-use. Oiling may be necessary to soften it enough to make it usable once again. The leather should be checked for any signs of dry rot or deterioration. If any signs of either of these situations exist, the equipment should not be used and should be disposed of.

Cleaners & Soap – How often? I recommend cleaning the equipment after each ride. The sweat from the horse can cause the leather to dry out and can also stain it. Regular cleaning will prevent this problem from occurring.

Conditioners – When & How Often? After the cleaning process a light coat of conditioner should be applied. The soaps will tend to remove some of the oils that are in the leather and the conditioner will restore these necessary oils.

Polish – What should never get polished & When is it OK to use it? I don't recommend leather dye or polish to darken leather. The oils in your saddlery leather prevent dyes and polishes from adhering to the leather. This will cause the polish or dye to rub off all over your hands, breeches, chaps, horse, etc... I do not recommend this for saddlery leather.

Metal Polish can be applied to any metal hardware. Brass polish works well on the brass and nickel hardware and stainless steel cleaners or just warm water can be used on Stainless steel.

Up Next... Leather Care Part 4 - Do's and Do Not's of Leather Care: An Overview

Subscribe to the Beval blog using the "Follow Our Feed" links to the left or Follow Us on Twitter for immediate updates!

Leather Care - Introduction

Our saddlers and staff are often asked for recommendations on leather care - from initially oiling new products to restoring old, worn leather. Over the years, we’ve seen leather at its absolute best and worst, so we know, first hand, the importance of consistent, quality leather care. We’ve been pleasantly surprised at some amazing results of proper care; likewise, we’ve been shocked at what can happen when leather is not given the TLC it deserves! To prevent your leather products from falling into the latter category, we’re here to give you the low down on the time-tested methods we’ve used in our workshops for years. While you may prefer slight adaptations of these recommendations based on personal preferences, climate, condition factors, etc… the most important thing to remember is that your leather needs consistent care. To keep things simple, we’ll break this up into 4 key topics:

Part 1: Initial Oiling or Pre-Conditioning
Part 2: Cleaning Leather: A Four-Step Process
Part 3: Leather Care Products: What, When & Why?
Part 4: Leather Care Do’s & Don’ts: An Overview

Subscribe to this blog using the "Follow Our Feed" links to the left or Follow Us on Twitter for immediate updates!

We're here to answer any questions you may have so please use this opportunity to pick our Saddler's brains!